Introduction to common types and performance of optical fiber connectors
Classification: Industry trends
2022-12-26 10:11
Optical fiber connector is a passive device that can realize the detachable connection between optical fibers and between optical fibers, and connect two end faces of optical fibers.
Generally, the optical fiber connector can be plugged and unplugged for more than 1000 times, with a long service life. The tensile strength is generally not less than 90N, and it can be used in the temperature range of - 40 ℃ to+70 ℃, with good performance.
At present, silicon based and plastic materials are the common media of optical fiber connectors, and the common types of connectors include FC, SC, LC, etc.
Among the above common models, FC connector was first developed by NTT Company of Japan. Its external reinforcement method is metal sleeve, and its fastening method is turnbuckle, with high tensile strength. FC connector can be used for single-mode optical fiber or multimode optical fiber, with simple structure, convenient operation and easy fabrication. However, its optical fiber end is sensitive to dust, and easy to generate Fresnel reflection, with large return loss.
The SC type optical fiber connector is developed by NTT Company of Japan. Its shell is made of molded glass fiber plastic with a rectangular shape. The structural dimensions of the pin and coupling sleeve used are identical to those of the FC type. Because it is fastened with a plug and pull pin latch type, it does not need to rotate. It is convenient for plug and pull operation, low in price, low in interference loss fluctuation, high in compressive strength, and high in installation density.
LC connector is first developed by Bell, a famous American laboratory. It is made of modular jack (RJ) latch mechanism, which is easy to operate. The size of the pin and sleeve used is only 1.25 mm, half of the size of ordinary SC, FC, etc., so it can improve the density of optical fiber connectors in the optical fiber distribution frame. So far, LC connectors have actually occupied a leading position in single-mode SFF, and their applications in multi-mode are also growing rapidly.
In addition, according to the shape and grinding degree of the end face of the optical fiber connector, the optical fiber connector can be divided into PC (close contact), SPC (super close contact), UPC (extremely close contact) and APC (angular physical contact) types. Their return loss, namely, the "decibel ratio of the backward reflected light (scattered light continuously transmitted to the input end) to the input light" at the optical fiber connection is respectively - 35dB; - 40dB;- 55dB;- 65 dB。
The smaller the return loss is, the smaller the influence of reflected light on the light source and system is. Therefore, among the above four, APC has the best performance and PC has the worst performance.